For: Pliers (singer)

History

Pliers were invented in Europe around 2000 BC to grip hot objects (principally iron as it was being forged on an anvil). Among the oldest illustrations of pliers are those showing the Greek god Hephaestus in his smithy. Today, pliers intended principally to be used for safely handling hot objects are usually called tongs. The number of different designs of pliers grew with the invention of the different objects which they were used to handle: horse shoes, fasteners, wire, pipes, electrical and electronic components.

Design

The basic design of pliers has changed little since their origins, with the pair of handles, the pivot (often formed by a rivet), and the head section with the gripping jaws or cutting edges forming the three elements. In distinction to a pair of scissors or shears, the plier's jaws always meet each other at one pivot angle.

Pliers are an instrument that convert a power grip - the curling of the fingers into the palm of the hand - into a precision grip, directing the power of the hand's grip in a precise fashion on to the object(s) to be gripped. The handles are long relative to the shorter nose of the pliers. The two arms thus act as first class levers with a mechanical advantage, increasing the force applied by the hand's grip and concentrating it on the work piece.

The materials used to make pliers consist mainly of steel alloys with additives such as Vanadium and/or Chromium, to improve alloy strength and prevent corrosion. Often pliers have insulated grips to ensure better handling and prevent electrical conductivity.

Common types

Gripping pliers

• Combination pliers or lineman's pliers
• Flat-nose pliers, also known as "duckbill," after their resemblance to a duck's bill. With long, narrow, flat jaws, they are stronger than long-nose (needle-nose) pliers, but less able to reach into really confined spaces
• Round-nose pliers, sometimes called snub-nosed pliers
• Long-nose pliers, Needle-nose pliers, or Snipe-nose pliers, which have long, narrow jaws for gripping in confined spaces
• Locking pliers, also called "Vise Grips" or "mole grips"
• Tongue and Groove pliers, also called Channellock pliers after a common manufacturer.

Special purpose pliers

• Wire-stripping pliers - cuts and removes insulation on electrical wire while leaving the wire intact
• Fencing tools - pliers that include a hammer, wire cutter and nail puller on one tool
• Retaining-ring or circlip pliers, which are used for fixing or loosening retaining rings
• Nail-pulling pliers - an adaptation of the end nipper used for cutting wire; the jaws may be asymmetric, allowing the nail to be pulled out with a rocking motion on the surface in which it is imbedded.
• Glass-breaking / Grozz Pliers (Breaker-grozier pliers).