In chemistry, paraffin is the common name for the alkane hydrocarbons with the general formula C_nH_2n+2. Paraffin wax refers to the solids with n=20–40.

The simplest paraffin molecule is that of methane, CH₄, a gas at room temperature. Heavier members of the series, such as that of octane C₈H₁₈, appear as liquids at room temperature. The solid forms of paraffin, called paraffin wax, are from the heaviest molecules from C₂₀H₄₂ to C₄₀H₈₂. Paraffin wax was identified by Carl Reichenbach in 1830.

Paraffin, or paraffin hydrocarbon, is also the technical name for an alkane in general, but in most cases it refers specifically to a linear, or normal alkane — whereas branched, or isoalkanes are also called isoparaffins. It is distinct from the fuel known in Britain as paraffin oil or just paraffin, which is called kerosene in South Africa, most of the U.S., Australia and New Zealand.

The name is derived from the Latin parum (= barely) + affinis with the meaning here of "lacking affinity", or "lacking reactivity". This is because alkanes, being non-polar and lacking in functional groups, are very unreactive.

Wax

Paraffin wax (or simply "paraffin", but see alternative name for kerosene, above) is mostly found as a white, odorless, tasteless, waxy solid, with a typical melting point between about 47 °C to 64 °C ( 116.6°F to 147.2°F), and having a density of around 0.9 g/cm³. It is insoluble in water, but soluble in ether, benzene, and certain esters. Paraffin is unaffected by most common chemical reagents, but burns readily.

Pure paraffin wax is an excellent electrical insulator, with an electrical resistivity of between $10^\{13\}$ and $10^\{17\}$ ohm metre. This is better than nearly all other materials except some plastics (notably teflon). It is an effective neutron moderator and was used in James Chadwick's 1932 experiments to identify the neutron.

Paraffin wax (C₂₅H₅₂) is an excellent material to store heat, having a specific heat capacity of 2.14–2.9 J g^–1 K^–1 (joule per gram per kelvin) and a heat of fusion of 200–220 J g^–1. This property is exploited in modified drywall for home building material: it is infused in the drywall during manufacture so that, when installed, it melts during the day, absorbing heat, and solidifies again at night, releasing the heat.

Wax expands considerably when it melts and this allows its use in thermostats for industrial, domestic and, particularly, automobile purposes.Wax-pellet thermostat United States Patent 4948043