Incandescent bulbs are made in a wide range of sizes and voltages, from 1.5 volts to about 300 volts. They require no external regulating equipment and have a low manufacturing cost, and work well on either alternating current or direct current. As a result the incandescent lamp is widely used in household and commercial lighting, for portable lighting, such as table lamps, some car headlamps and electric flashlights, and for decorative and advertising lighting.

Some applications of the incandescent bulb make use of the heat generated, such as incubators (for hatching eggs), brooding boxes for young poultry, heat lights for reptile tanks, infrared heating for industrial heating and drying processes, and the Easy-Bake Oven toy. In cold weather the heat shed by incandescent lamps contributes to building heating, but in hot climates lamp losses increase the energy used by air conditioning systems.

Incandescent light bulbs are gradually being replaced in many applications by (compact) fluorescent lights, high-intensity discharge lamps, light-emitting diodes (LEDs), and other devices, which give more visible light for the same amount of electrical energy input. Some jurisdictions are attempting to ban the use of incandescent lightbulbs in favour of more energy-efficient lighting.

History of the light bulb

Another historian, Thomas Hughes, has attributed Edison's success to the fact that he invented an entire, integrated system of electric lighting. "The lamp was a small component in his system of electric lighting, and no more critical to its effective functioning than the Edison Jumbo generator, the Edison main and feeder, and the parallel-distribution system. Other inventors with generators and incandescent lamps, and with comparable ingenuity and excellence, have long been forgotten because their creators did not preside over their introduction in a system of lighting."

Early pre-commercial research

In 1802, Humphry Davy had what was then the most powerful electrical battery in the world at the Royal Institution of Great Britain. In that year, he created the first incandescent light by passing the current through a thin strip of platinum, chosen because the metal had an extremely high melting point. It was not bright enough nor did it last long enough to be practical, but it was the precedent behind the efforts of scores of experimenters over the next 75 years until Thomas Edison's creation of the first commercially practical incandescent lamp in 1879.Davis, L.J. "Fleet Fire." Arcade Publishing, New York, 2003. ISBN 1-55970-655-4 In 1809, Davy also created the first arc lamp by making a small but blinding electrical connection between two carbon charcoal rods connected to a 2000 cell battery; it was demonstrated to the Royal Institution in 1810.