A hydrofoil is a boat with wing-like foils mounted on struts below the hull. As the craft increases its speed the hydrofoils develop enough lift for the boat to become foilborne - i.e. to raise the hull up and out of the water. This results in a great reduction in drag and a corresponding increase in speed.

The term "hydrofoil" is also used to refer to the foil itself, especially when the airfoil profile has been specifically designed for use in water (such as for a propeller blade).

Hydrodynamics

Since air and water are governed by similar fluid equations, albeit with different levels of viscosity and compressibility, the hydrofoil and airfoil create lift in identical ways (see Foil (fluid mechanics)). The foil is shaped to move smoothly through the water with faster flow over the top face of the foil the creating a pressure drop and subsequently an upwards force on the foil. This upward force lifts the body of the vessel, decreasing drag and increasing speed. The lifting force eventually balances with the weight of the craft, reaching a point where the hydrofoil no longer lifts out of the water, but remains in equilibrium. Since the force of the waves acts over a smaller area of the hydrofoil, there is a marked decrease in turbulence drag.

Foils configurations

Early hydrofoils used V-shape foils. Hydrofoils of this type are known as surface-piercing since portions of the V-shape hydrofoils will rise above the water surface when foilborne. Some modern hydrofoils use inverted T-shape foils which are fully submerged. Fully submerged hydrofoils are less subject to the effects of wave action, and are therefore more stable at sea and are more comfortable for the crew and passengers. This type of configuration, however, is not self-stabilizing. The angle of attack on the hydrofoils needs to be adjusted continuously in accordance to the changing conditions, a control process that is performed by sensors, computer and active surfaces.

Hydrofoils are now being applied in multiple marine applications.

Prototypes

A March 1906 Scientific American article by American hydrofoil pioneer William E. Meacham explained the basic principle of hydrofoils. Alexander Graham Bell considered the invention of the hydroplane a very significant achievement. After reading this article Bell began to sketch concepts of what is now called a hydrofoil boat. With Casey Baldwin, he began hydrofoil experimentation in the summer of 1908. Baldwin studied the work of the Italian inventor Enrico Forlanini and began testing models based on his designs. This led him and Bell to the development of hydrofoil watercraft. During Bell's world tour of 1910-1911 he and Baldwin met with Forlanini in Italy. They had rides in the Forlanini hydrofoil boat over Lake Maggiore. Baldwin described it as being as smooth as flying. On returning to Baddeck a number of designs were tried culminating in the HD-4. Using Renault engines a top speed of 87 km/h (54 mph) was achieved, accelerating rapidly, taking wave without difficulty, steering well and showing good stability. Bell's report to the United States Navy permitted him to obtain two 260 kW (350 horsepower) engines. On September 9, 1919 the HD-4 set a world marine speed record of 114 km/h (70.86 mph). This record stood for ten years. A full-scale replica of the HD-4 can be seen in the museum on the Alexander Graham Bell National Historic Site in Baddeck.