Water heating is a thermodynamic process using an energy source to heat water above its initial temperature. Typical domestic uses of hot water are for cooking, cleaning, bathing, and space heating. In industry, both hot water and water heated to steam have many uses.

Domestically, water is traditionally heated in vessels known as kettles, cauldrons, pots, or coppers. These vessels heat a batch of water but do not produce a continual supply. Appliances for providing a more-or-less constant supply of hot water are variously known as water heaters, boilers, heat exchangers, calorifiers, or geysers depending on whether they are heating potable or non-potable water, in domestic or industrial use, their energy source, and in which part of the world they are found. In domestic installations, potable water heated for uses other than space heating is sometimes known as domestic hot water (DHW).

In many countries the most common energy sources for heating water are fossil fuels: natural gas, liquefied petroleum gas, oil, or sometimes solid fuels. These fuels may be consumed directly or by the use of electricity (which may derive from any of the above fuels or from nuclear or renewable sources). Alternative energy such as solar energy, heat pumps, hot water heat recycling, and sometimes geothermal heating, may also be used as available, usually in combination with backup systems supplied by gas, oil or electricity.

In some countries district heating is a major source of water heating. This is especially the case in Scandinavia. District heating systems make it possible to supply all of the energy for water heating as well as space heating from waste heat from industries, power plants, incinerators, geothermal heating, and central solar heating. The actual heating of the tap water is performed in heat exchangers at the consumers premises. Generally the consumer needs no backup system due to the very high availability of district heating systems.

Types of water heating appliance

Water for space heating can be heated by fossil fuels in a boiler. Potable water may be heated in a separate appliance: this is common practice in the USA where warm-air space heating is usually employed.

Gravity system

Where a space-heating water boiler is employed the traditional arrangement in the UK is to use boiler-heated ("primary") water to heat ("secondary") water in a cylindrical vessel (usually made of copper) containing potable water supplied from a cold water storage tank, usually in the roof space of the building. This produces a fairly steady supply of DHW at low static pressure head but usually with a good flow. Water heating appliances in most other parts of the world do not use cold water storage tanks but heat water at pressures close to that of the incoming mains water supply.