for: drying (food) Drying is a mass transfer process resulting in the removal of water moisture or moisture from another solvent, by evaporation from a solid, semi-solid or liquid (hereafter product) to end in a solid state. To achieve this, there must be a source of heat, and a sink of the vapor thus produced.

In the most common case, a gas stream, e.g., air, applies the heat by convection and carries away the vapor as humidity. Other possibilities are vacuum drying, where heat is supplied by contact conduction or radiation (or microwaves) while the produced vapor is removed by the vacuum system. Another indirect technique is drum drying, where a heated surface is used to provide the energy and aspirators draw the vapor outside the room.

Freeze drying or lyophilization is a drying method where the solvent is frozen prior to drying and is then sublimed, i.e., passed to the gas phase directly from the solid phase, below the melting point of the solvent. Freeze drying is often carried out under high vacuum to allow drying to proceed at a reasonable rate. This process avoids collapse of the solid structure, leading to a low density, highly porous product, able to regain the solvent quickly. In biological materials or foods, freeze drying is regarded as one of the best if not the best method to retain the initial properties. It was first used industrially to produce dehydrated vaccines, and to bring dehydrated blood to assist war casualties. Now freeze drying is increasingly used to preserve some foods, especially for backpackers going to remote areas. The method may keep protein quality intact, the same as the activity of vitamins and bioactive compounds.

In turn, the mechanical extraction of the solvent, e.g., water, by centrifugation, is not considered "drying". The ubiquitous term dehydration may mean drying of water-containing products as foods, but its meaning is more vague, as it is also applied for water removal by osmotic drive from a salt or sugar solution. In medicine, dehydration is the situation by which a person loses water by respiration, sweating and evaporation and does not incorporate, for whatever reason, the "make-up" water required to keep the normal physiological behavior of the body.

There is very extensive technical literature on this subject, including several major textbooks and a dedicated scientific journal (Drying Technology 1).

Methods of drying

• Application of heated air (convective or direct drying). Air heating reduces air relative humidity, which is the driving force for drying. Besides, higher temperatures speed up diffusion of water inside the solids, so drying is faster. However, product quality considerations limit the applicable rise to air temperature. Too hot air almost completely dehydrates the solid surface, so internal pores shrink and almost close, leading to crust formation or "case hardening".
• Indirect or contact drying (heating through a hot wall), as drum drying, vacuum drying.
• Dielectric drying (radiofrequency or microwaves being absorbed inside the material) It is the focus of intense research nowadays. It may be used to assist air drying or vacuum drying.
• Freeze drying Is increasingly applied to dry foods, beyond its already classical pharmaceutical or medical applications. It keeps biological properties of proteins, and retains vitamins and bioactive compounds. Pressure may be reduced by a vacuum pump. If using a vacuum pump, the vapor produced by sublimation is removed from the system by converting it into ice in a condenser, operating at very low temperatures, outside the freeze drying chamber.
• Supercritical drying (superheated steam drying) involves steam drying of products containing water. Strange as it seems, this is possible because the water in the product is boiled off, and joined with the drying medium, increasing its flow. It is usually employed in closed circuit and allows a proportion of latent heat to be recovered by recompression, a feature which is not possible with conventional air drying, for instance. May have potential for foods if carried out at reduced pressure, to lower the boiling point.
• Natural air drying takes place when materials are dried with unheated forced air, taking advantage of its natural drying potential. The process is slow and weather-dependent, so a wise strategy "fan off-fan on" must be devised considering the following conditions: Air temperature, relative humidity and moisture content and temperature of the material being dried. Grains are increasingly dried with this technique, and the total time (including fan off and on periods) may last from one week to various months, if a winter rest can be tolerated in cold areas.