A biosensor is a device for the detection of an analyte that combines a biological component with a physicochemical detector component.

It consists of 3 parts:

• the sensitive biological element (biological material (eg. tissue, microorganisms, organelles, cell receptors, enzymes, antibodies, nucleic acids, etc), a biologically derived material or biomimic) The sensitive elements can be created by biological engineering.
• the transducer or the detector element (works in a physicochemical way; optical, piezoelectric, electrochemical, etc.) that transforms the signal resulting from the interaction of the analyte with the biological element into another signal (i.e., transducers) that can be more easily measured and quantified;
• associated electronics or signal processors that is primarily responsible for the display of the results in a user-friendly way.

The most widespread example of a commercial biosensor is the blood glucose biosensor, which uses the enzyme glucose oxidase to break blood glucose down. In doing so it first oxidizes glucose and uses two electrons to reduce the FAD (a component of the enzyme) to FADH2. This in turn is oxidized by the electrode (accepting two electrons from the electrode) in a number of steps. The resulting current is a measure of the concentration of glucose. In this case, the electrode is the transducer and the enzyme is the biologically active component.

Recently, arrays of many different detector molecules have been applied in so called electronic nose devices, where the pattern of response from the detectors is used to fingerprint a substance. Current commercial electronic noses, however, do not use biological elements.

A canary in a cage, as used by miners to warn of gas could be considered a biosensor. Many of today's biosensor applications are similar, in that they use organisms which respond to toxic substances at a much lower level than us to warn us of their presence. Such devices can be used in environmental monitoring, trace gas detection and in water treatment facilities.

Photometric

Surface plasmon resonance sensors operate using a sensor chip consisting of a plastic cassette supporting a glass plate, one side of which is coated with a microscopic layer of gold. This side contacts the optical detection apparatus of the instrument. The opposite side is then contacted with a microfluidic flow system. The contact with the flow system creates channels across which reagents can be passed in solution. This side of the glass sensor chip can be modified in a number of ways, to allow easy attachment of molecules of interest. Normally it is coated in carboxymethyl dextran or similar compound.

Light, at a fixed wavelength is reflected off the gold side of the chip, at the angle of total internal reflection and detected inside the instrument. This induces the evanescent wave to penetrate through the glass plate and someway into the liquid flowing over the surface.