In IBM PC Compatible computers, the Basic Input/Output System (BIOS) , also known as the System BIOS, is a de facto standard defining a firmware interface. The PC Guide - System BIOS

The BIOS is boot firmware, designed to be the first code run by a PC when powered on. The initial function of the BIOS is to identify, test, and initialize system devices such as the video display card, hard disk, and floppy disk and other hardware. This is to prepare the machine into a known state, so that software stored on compatible media can be loaded, executed, and given control of the PC. This process is known as booting, or booting up, which is short for bootstrapping.

BIOS programs are stored on a chip and are built to work with various devices that make up the complementary chipset of the system. They provide a small library of basic input/output functions that can be called to operate and control the peripherals such as the keyboard, text display functions and so forth. In the IBM PC and AT, certain peripheral cards such as hard-drive controllers and video display adapters carried their own BIOS extension ROM, which provided additional functionality. Operating systems and executive software, designed to supersede this basic firmware functionality, will provide replacement software interfaces to applications.

Terminology

The term first appeared in the CP/M operating system, describing the part of CP/M loaded during boot time that interfaced directly with the hardware (CP/M machines usually had only a simple boot loader in their ROM). Most versions of DOS have a file called "IBMBIO.COM" or "IO.SYS" that is analogous to the CP/M BIOS.

Among other classes of computers, the generic terms boot monitor, boot loader or boot ROM were commonly used. Some Sun and PowerPC-based computers use Open Firmware for this purpose. There are few alternatives for Legacy BIOS in the x86 world: Extensible Firmware Interface, Open Firmware (used on the OLPC XO-1) and coreboot.

IBM PC-compatible BIOS Chips

In principle, the BIOS in ROM was customized to the particular manufacturer's hardware, allowing low-level services (such as reading a keystroke or writing a sector of data to diskette) to be provided in a standardized way to the operating system. For example, an IBM PC might have had either a monochrome or a color display adapter, using different display memory addresses and hardware - but the BIOS service to print a character on the screen in text mode would be the same. Fact: date=January 2009

Prior to the early 1990s, BIOSes were stored in ROM or PROM chips, which could not be altered by users. As its complexity and need for updates grew, and re-programmable parts became more available, BIOS firmware was most commonly stored on EEPROM or flash memory devices. According to Robert Braver, the president of the BIOS manufacturer Micro Firmware, Flash BIOS chips became common around 1995 because the electrically erasable PROM (EEPROM) chips are cheaper and easier to program than standard erasable PROM (EPROM) chips. EPROM chips may be erased by prolonged exposure to ultraviolet light, which accessed the chip via the window. Chip manufacturers use EPROM programmers (blasters) to program EPROM chips. Electrically erasable (EEPROM) chips come with the additional feature of allowing a BIOS reprogramming via higher-than-normal amounts of voltage. BIOS versions are upgraded to take advantage of newer versions of hardware and to correct bugs in previous revisions of BIOSes.