''' A barcode reader (or barcode scanner) is an electronic device for reading printed barcodes. Like a flatbed scanner, it consists of a light source, a lens and a light sensor translating optical impulses into electrical ones. Additionally, nearly all barcode readers contain decoder circuitry analyzing the barcode's image data provided by the sensor and sending the barcode's content to the scanner's output port.

Methods

Scanning methods are distinguished by the amount of operator manipulation required:

• Pen or wand-type readers: requires the operator to swipe the pen over the code.
• Semi-automatic handheld readers: The operator need not swipe, but must at least position the reader near the label
• Fix-mount readers for automatic reading: The reading is performed laterally passing the label over the reader. No operator is required, but the position of the code target must coincide with the imaging capability of the reader and ll
• Reader gates for automatic scanning: The position of the code must be just under the gate for short time, enabling the scanner sweep to capture the code target successfully.

Types of technology

The reader types can be distinguished as follows:

• Pen type readers

Pen type readers consist of a light source and a photodiode that are placed next to each other in the tip of a pen or wand. To read a bar code, the tip of the pen moves across the bars in a steady motion. The photodiode measures the intensity of the light reflected back from the light source and generates a waveform that is used to measure the widths of the bars and spaces in the bar code. Dark bars in the bar code absorb light and white spaces reflect light so that the voltage waveform generated by the photo diode is a representation of the bar and space pattern in the bar code. This waveform is decoded by the scanner in a manner similar to the way Morse code dots and dashes are decoded.

• Laser scanners

Laser scanners work the same way as pen type readers except that they use a laser beam as the light source and typically employ either a reciprocating mirror or a rotating prism to scan the laser beam back and forth across the bar code. As with the pen type reader, a photodiode is used to measure the intensity of the light reflected back from the bar code. In both pen readers and laser scanners, the light emitted by the reader is tuned to a specific frequency and the photodiode is designed to detect only this modulated light of the same frequency.

• CCD Readers

CCD readers (also referred to as LED scanner) use an array of hundreds of tiny light sensors lined up in a row in the head of the reader. Each sensor measures the intensity of the light immediately in front of it. Each individual light sensor in the CCD reader is extremely small and because there are hundreds of sensors lined up in a row, a voltage pattern identical to the pattern in a bar code is generated in the reader by sequentially measuring the voltages across each sensor in the row. The important difference between a CCD reader and a pen or laser scanner is that the CCD reader is measuring emitted ambient light from the bar code whereas pen or laser scanners are measuring reflected light of a specific frequency originating from the scanner itself.