An analog or analogue signal is any continuous signal for which the time varying feature (variable) of the signal is a representation of some other time varying quantity, i.e analogous to another time varying signal. It differs from a digital signal in that small fluctuations in the signal are meaningful. Analog is usually thought of in an electrical context; however, mechanical, pneumatic, hydraulic, and other systems may also convey analog signals.

Essentially an analogue signal can be thought of as a simulation or duplication of one continuous time varying quantity in another, possibly different, time varying quantity. It is then a mapping of one time varying quantity to another, often with the intent of recording or transmitting information about the former within the medium of the latter.

An analog signal uses some property of the medium to convey the signal's information. For example, an aneroid barometer uses rotary position as the signal to convey pressure information. Electrically, the property most commonly used is voltage followed closely by frequency, current, and charge.

Any information may be conveyed by an analog signal; often such a signal is a measured response to changes in physical phenomena, such as sound, light, temperature, position, or pressure, and is achieved using a transducer.

For example, in sound recording, fluctuations in air pressure (that is to say, sound) strike the diaphragm of a microphone which causes corresponding fluctuations in a voltage or the current in an electric circuit. The voltage or the current is said to be an "analog" of the sound.

Any measured analog signal must theoretically have noise and a finite slew rate. Therefore, both analog and digital systems are subject to limitations in resolution and bandwidth. In practice, as analog systems become more complex, effects such as non-linearity and noise ultimately degrade analog resolution to such extent that the performance of digital systems may surpass it. In analog systems, it is difficult to detect when such degradation occurs. However, in digital systems, degradation can not only be detected but corrected as well.

Advantages

The main advantage is the fine definition of the analog signal which has the potential for an infinite amount of signal resolution. Compared to digital signals, analog signals are of higher density..

Another advantage with analog signals is that their processing may be achieved more simply than with the digital equivalent. An analog signal may be processed directly by analog components, though some processes aren't available except in digital form.

Disadvantages

The primary disadvantage of analog signaling is that any system has noise – i.e., random unwanted variation. As the signal is copied and re-copied, or transmitted over long distances, these random variations become dominant. Electrically, these losses can be diminished by shielding, good connections, and several cable types such as coaxial or twisted pair.