Data Over Cable Service Interface Specification (DOCSIS) is an international standard developed by CableLabs and contributing companies that include: ARRIS, BigBand Networks, Broadcom, Cisco, Conexant, Correlant, Harmonic, Intel, Motorola, Netgear, Terayon, and Texas Instruments. DOCSIS defines the communications and operation support interface requirements for a data over cable system. It permits the addition of high-speed data transfer to an existing Cable TV (CATV) system. It is employed by many cable television operators to provide Internet access (see cable internet) over their existing hybrid fibre coaxial (HFC) infrastructure. The first DOCSIS specification was version 1.0, issued in March 1997, with revision 1.1 (adding Quality of Service (QoS) capabilities) following in April 1999. Because of increased demand for symmetric services such as IP telephony, DOCSIS was revised to enhance upstream transmission speeds; DOCSIS 2.0 was released in December 2001. Most recently, the specification was revised to significantly increase transmissions speeds (this time both upstream and downstream) and introduce support for Internet Protocol version 6 (IPv6). This version, DOCSIS 3.0, was released in August 2006. Cross-version compatibility has been maintained across all versions of DOCSIS, with the devices falling back to the highest supported version in common between both endpoints (cable modem and cable modem termination system).

As frequency allocation band plans differ between U.S. and European CATV systems, DOCSIS standards have been modified for use in Europe. These changes were published under the name of "EuroDOCSIS". The main differences account for differing TV channel bandwidths; European cable channels conform to PAL TV standards and are 8 MHz wide, whereas in North-America cable channels conform to NTSC standards which specify 6 MHz. The wider bandwidth in EuroDOCSIS architectures permits more bandwidth to be allocated to the downstream data path (toward the user). EuroDOCSIS certification testing is executed by Excentis (formerly known as tComLabs), while DOCSIS certification testing is executed by CableLabs. Typically, CPE gear receives "Certification", while CMTS equipment receives "Qualification".

Japan employs other variants of DOCSIS.

International Standards

The International Telecommunications Union Telecommunications Standardization Sector (ITU-T) has approved the various versions of DOCSIS as international standards. DOCSIS 1.0 was ratified as ITU-T Recommendation J.112 Annex B (1998), but it was superseded by DOCSIS 1.1 which was ratified as ITU-T Recommendation J.112 Annex B (2001). Subsequently, DOCSIS 2.0 was ratified as ITU-T Recommendation J.122. Most recently, DOCSIS 3.0 was ratified as ITU-T Recommendation J.222 (J.222.1J.222.2J.222.3).